Like cars, the cutting machine needs some routine maintenance after being used for a period of time. What does the maintenance of the cutting machine include? Now let's make a detailed introduction.

First, the hydraulic oil replacement cycle is one year (of course, you can also shorten or extend it according to your actual use). Clean the oil tank and filter while changing the hydraulic oil. Please select the hydraulic oil with the mark of 46 #, which is a regular big factory brand.

Second, dust removal and foreign matters removal should be carried out every day (electrical dust should be handled by professionals), paying special attention to sliding and rotating parts. Please note that! Clean the dust after the machine is completely shut down.

Third, fastening bolts The fastening bolts are an important part of the maintenance of the cutting machine. The bolts that are loosened for a long time will break and cause more problems or accidents, so please do this work carefully (we suggest that it is appropriate to check every three months).

Fourth, check the lubrication system The sliding and rotating parts of the cutting machine need to be filled with lubricating oil, and good lubrication is necessary for machine operation, so it is particularly necessary to regularly check the automatic lubrication system.

Fifth, check the parallelism of the table. In actual use, it is impossible to let the cutter die cut at the center of the cutter every time. Long time off center cutting will lead to poor parallelism of the cutter, thus accelerating the wear of the cutter die and the base plate. Regularly check the parallelism of the table top, so as to know the parallelism of the table top of the cutting machine at any time, so as to adjust the punching position of the knife die and correct the unevenness during use, so that the cutting machine can be used longer and play its best performance.